Back to Blog
A gaming monitor showing a rising performance line
  • guide
  • performance
  • hardware

Fix PC Stutter and FPS Drops

Fix PC stutter and FPS drops: check temperatures, background apps, dual-channel RAM, XMP and EXPO, shader cache, and frame caps.

HonestEdge Team

A steady 60 frames per second feels better than 100 that hitch every few seconds. Average frame rate looks fine on paper, but the frame times spike and the game feels broken.

Stutter has a short list of usual causes: heat, background apps, memory in single channel or at the wrong speed, a damaged shader cache, slow storage, or a frame rate that keeps crossing your monitor's refresh rate. Change one thing at a time so you know what worked.

Quick fix (try this first): Close everything you are not using, then cap your frame rate a few frames below your monitor's refresh. If the stutter goes away, you had a frame pacing problem rather than a slow PC.

Name the problem first

Watch one game for a few minutes before touching anything.

  • Low but steady frame rate. You are asking for more than the hardware can give. That is a settings or upgrade decision, not a tweak.
  • Random hitching while the frame rate looks fine. Memory, storage, background apps or shader compilation.
  • Stutter that gets worse the longer you play. Heat, a memory leak, or video memory filling up.
  • Stutter in one game only. That game's engine or settings, not Windows.

Step 1: Check temperatures while you play

Processors slow themselves down when they get hot, and that protection looks exactly like stutter.

  1. Turn on the performance overlay in your graphics card's own app. NVIDIA and AMD both offer one with no extra downloads.
  2. Play for ten minutes and watch the clocks. If the clock speed drops as the temperature climbs, you are thermal throttling.
  3. Give the case room at the front and back, and keep it out of closed cupboards.
  4. On a laptop, use a hard flat surface rather than a bed, and keep the vents clear.
  5. Clean dust from filters and fans with the PC off. Repasting a cooler is a job for someone who has done it before, so treat it as a last resort.

Step 2: Close the background apps that eat frames

  1. Open Task Manager and sort by GPU, then by CPU, with the game running in the background.
  2. Close whatever is high on both lists: extra browser windows, chat apps, launchers, capture tools, RGB utilities.
  3. Turn off browser hardware acceleration if a browser stays open while you play. It borrows the graphics card.
  4. Pause cloud sync and stop any stream in a background tab.
  5. Do not disable your antivirus. Schedule full scans for when you are not gaming and leave real-time protection on.

For a deeper tidy-up of what starts with Windows, our Windows 11 speed-up guide covers it without risky changes.

Step 3: Make sure your RAM is in dual channel

Two matching sticks give your memory twice the bandwidth of one stick on most desktop boards. Big open-world games notice it in their worst moments.

  1. Open Task Manager, then Performance, then Memory. Check the slots used and the speed.
  2. If it shows one slot of two, you are in single channel. A second matching stick is one of the cheapest real upgrades you can make.
  3. Check your motherboard manual for the right slots. It is usually the second and fourth from the processor, but not always.
  4. Mixing two different sticks can work, but matched pairs cause fewer problems.
  5. On a laptop, memory is often soldered. If there is no free slot, there is nothing to add.

Step 4: Understand XMP and EXPO before you touch it

Memory kits are sold at a rated speed, but most motherboards start them slower so the machine boots reliably. XMP on Intel boards and EXPO on AMD boards are stored profiles that run the kit at the speed you paid for.

Three things worth knowing before you enable it:

  • It counts as overclocking. The memory and the processor's memory controller both have to cope.
  • If it is unstable, you get crashes, black screens or stutter, which is worse than the slower default.
  • It is easy to undo, and clearing the CMOS resets the board if a change stops it booting.
  1. Restart and enter the BIOS setup. The key is shown on the boot screen and varies by board.
  2. Find the memory profile setting. It may be called XMP, EXPO, DOCP or A-XMP.
  3. Enable the profile, save and exit.
  4. Test it properly: run Windows Memory Diagnostic from the Start menu, then play a demanding game.
  5. If it is unstable, turn the profile off. Do not start editing voltages and timings unless you know what you are doing.

If the PC will not boot after a change, turn it off and follow your motherboard manual for clearing the CMOS, usually a jumper or a small battery. That resets the settings.

Step 5: Clear your shader cache the safe way

Games compile shaders for your specific card and cache the result so they do not have to do it every time. A damaged cache can cause stutter, hitches and odd visual glitches.

  1. Use the shader cache option in your graphics driver's own app rather than deleting folders by hand. NVIDIA and AMD both offer one.
  2. If the app offers a reset, use it, then restart.
  3. Expect the first launch of each game to stutter while the cache rebuilds. That settles.
  4. Do not delete random folders inside driver directories. If the app has no option, leaving it alone is safer than following a forum post.

Some stutter is not yours to fix. Many modern games hitch for the first few minutes while they compile shaders, and driver updates wipe the cache so the hitching returns briefly. Let the game settle and check for patches before you change settings.

Step 6: Use V-Sync, a frame cap or VRR on purpose

These three decide how smooth the picture feels, and they interact.

  • V-Sync stops tearing but adds latency, and can stutter when you drop below the refresh rate.
  • A frame cap a few frames below your refresh rate, in the game or the driver, keeps frame times even. It is often the best fix for mild stutter.
  • VRR (G-Sync or FreeSync) lets the monitor follow the game's frame rate. It needs a compatible monitor, the right cable and the setting on in both the monitor menu and the driver.

If your frame rate swings a lot, lower settings until it is stable rather than chasing a bigger number. Our budget gaming monitor picks explain which features matter for smooth play, including VRR.

Step 7: Check storage and video memory

  1. If a game sits on an old mechanical hard drive, move it to an SSD. Texture streaming stutter is a classic hard drive problem.
  2. Leave a decent amount of free space on the drive Windows uses. A full drive slows everything down.
  3. Leave the page file managed by Windows. Turning it off to save space causes stutter and crashes.
  4. If your card runs out of video memory, lower texture quality first, then shadows.

If it's your hardware

If all of this is done and the worst moments still hitch, memory, storage or a graphics card at its limit are the likely causes. Our budget gaming PC parts guide explains which parts smooth out frame times most, and which upgrades are not worth the money.

All posts